Projects80
Hardware you can order, print, flash and log.
Open 8-DOF dexterous robotic hand.
Updated today
Open robotic data-recording device for collecting manipulation demonstrations.
Updated today
Hugging Face open humanoid hardware and runtime.
Updated today
Open 3D-printed humanoid robot platform.
Updated today
The reference open-source FDM 3D printer.
Updated today
Compact open-source FDM printer from Prusa Research.
Updated today
The original self-replicating open-source 3D printer.
Updated today
35×35mm STM32H743 flight controller, ICM-42688 IMU, 8 motor outputs, Betaflight target included.
Updated 11 days ago
Solar LoRa node: soil moisture, leaf wetness, SHT41, and a supercap that rides out four cloudy days.
Updated 17 days ago
Atlas with the LM7805 replaced by an MP1584 buck. Runs cool on 3S.
Updated 23 days ago
Constant-current electronic load, 0–1A, 0–30V, with a rotary encoder UI and USB logging.
Updated 1 months ago
Three-DOF leg: STS3215 bus servos, a 20mm slip-ring-free cable route, and printable linkages.
Updated 1 months ago
nRF5340 port. Nine days on the same cell, no Wi-Fi, BLE audio only.
Updated 1 months ago
Sidekick with a 60×80mm panel, an LTC3105 harvester and no USB port at all.
Updated 18 days ago
Swaps two motor channels for an isolated CAN transceiver and 120Ω termination jumper.
Updated 1 months ago
Adds a 2.13" partial-refresh panel that shows live transcripts.
Updated 1 months ago
Conductivity sibling of the pH probe. Same guard-ring front end, four-electrode cell.
Updated 28 days ago
Open-source quadruped robot.
Updated today